The surface to be manufactured must be ready for application.
The surface to be manufactured must be clean and dry.
1- The surface to be manufactured should be cleaned from foreign materials and cleaned.
1- The mat in front of the entrance doors should cover the entire width of the door. Mats are suitable for the project
In this way, it should be used with sufficient width in the direction of walking to remove dirt, moisture and wetness coming from the feet.
2- The mat should be embedded in the floor together with its profiles and should be on the same surface with the floor.
(according to the thickness of the mat, the floor elevation should be lowered where the mat will be located)
3-Resistance application is required on the mat floor.
4-Edge profile must be mounted on the flooring unit material.
ARTLINES PREMIUM 15MM INTERIOR ALUMINUM MAT
Mats will be produced according to the project and measurements to be taken on site.
Product Code: ARTPR 15.0220
Material: Aluminum Doormat with Velour Carpet Surface
Top surface: 100% Polyamide Yarn Velour Carpet strips with Pvc Backing
Bottom surface: Bottom PVC wick to prevent noise and slipping
Profile thickness: 2.0 mm
Profile height: 15 mm
Finished height: 19 mm
Area of Use: Interior
Share this Product